DIGITAL INVERTER
Technical specifications
Capacity 200 VA to 5 KVA
Input Voltage 100 to 300 V
Input Frequency 50 Hz +– 3 Hz
Output voltage (Inverter Mode) 230 V +- 8%
Waveform on Battery Modified Sine Wave
Efficiency Better than 90%
Cold Start Available
Battery Boost Charging Current 5 to 10 A
Protections Phase reversal
  Overload
Short Circuit
Over Charging
Battery Deep Discharge
Unique Features

Micro Processor Based Technology
Mains High & Low Cut – Off
PWM based pulse charging for longer Battery life
Auto Rest features for Over Load, Short Circuil
And Low Battery.
Generator Compatible
Noise & Pollution Free Technology
 
SINEWAVE INVERTER
Technical specifications
Capacity 200 VA to 30 KVA
Input Voltage 130 to 280 V
Input Frequency 45 to 55 Hz
Output Voltage (Inverter Mode) 210/220 V
Output Voltage Regulation +-2 %
Waveform on Battery Pure Sine Wave
Efficiency Better than 90%
Cold Start Available
Battery Boost Charging Current 5 to 15 A
Protections Battery Under / Over Voltage
Output Overload
Short Circuit
Unique Features

Pure Sine Wave Output
High Frequency PWM design using IGBT/MOSFET
Excellent dynamic response for step load change
High inrush / peak current handling capacity
Easy to install, use and maintain
 
UPS SYSTEMS
Technical specifications
True Online – UPS Systems (0.5KV to 100 KVA)
Home UPS (200 VA to 3 KVA)
Line Interactive UPS (500VA to 3 KVA)
Sine Wave UPS (1KVA to 3KVA)
 
TRUE ONLINE UPS
Technical specifications
Capacity 500 VA to 100 KVA
Input Voltage 160-270 V AC Tow Wire
Input Frequency 330-470 V AC Four wire
Rectifier _ Charger 47 – 53 Hz.
  Automatic Float cum Boost Charger
Battery Input 24 – 360 V DC (or as per requirement)
Battery Back-up 15 min. to 8 Hrs. (or as per requirement)
Output Voltage 230/415 V AC (or as per requirement)
Regulation +- 1% under all lines and Load Conditions.
Output Frequency 50 Hz.
Regulation +- 0.05%
Inverter Efficiency Better than 90%
Waveform Pure Sine Wave (Sinusoidal)
THD < 3% at Linear Load
Transient Response +- 5% under Step Load Change
Transient Recovery within 3 cycles
Load Power Factor 3:1
Control Method Sinusoidal PWM Control
SwitchingFrequency above 10 Khz
Circuit Method On-Line Double Conversion
  Zero Transfer Time
Ambient Temperature 00- 450 C
Relative Humidity 95% RH Max. (Non Condensing)
Audible Noise Less than 55 dB at 1.5 meters
Cooling Forced Air Type
Protections Battery Under and Over Voltage
Output Overload and Short Circuit
Features

Wide Input Range
Generator compatible
Soft Start Facility
Crystal Control Output Frequency
Output Isolation
Unlimited Backup

Optional Features

Static/ Manual Bypass
Parallel Redundancy
Remote Indication Panel
Serial RS 232 Interface
Microprocessor Based Digital Metering

 
HOME UPS (MIX LOAD COMPATIBLE)
Technical specifications
Capacity 200 VA to 3 KVA
Input Voltage 180 to 260 V
Input Frequency 50 Hz + 3 Hz.
Output Voltage (Inverter Mode) 230 V + 8%
Waveform on Battery Modified Sine Wave
Efficiency Better than 90%
Cold Start Available
Battery Boost Charging Current 5A to 10A
Protections Phase reversal / Overload
Short Circuit
Battery Deep Discharge
Features

Micro-processor Based Technology
Mains High & Low Cut –Off
PWM based pulse charging for longer Battery life.
Auto Reset features for Over Load, Short Circuit and Low Battery.
Generator compatible
 
LINE INTERACTIVE UPS
Technical specifications
Capacity 500 VA to 3 KVA
Input AVR Range 150 to 280 V
Input Frequency 45 Hz to 50 Hz.
Output Voltage (on Mains & INV) 200 – 250 V
Battery Voltage 12 / 24 / 36 V (as per capacity)
Battery Recharge Time 5 to 8 hrs. to get 90% charge
Transfer Time Mains to Inverter < 4 milliseconds
Backup Time Built –in-model : 20-60 mins.
External model : as per requirement
Protections Over and Under Voltage
Short Circuit
Battery Low and Over Load
Features

Micro-Processor Based Line Interactive UPS
Built-In AVR with wide input range
High Speed Mosfet Protections.
Relay change over near zero current / zero voltage
Generator compatible
Cold Start
Auto Shut Down Software (Optional)


Also available

SINE WAVE UPS 1 KVA TO 3 KVA

 
CONSTANT VOLTAGE TRANSFORMER
Technical specifications
Capacity 150 VA to 25 KVA
Input 130 V to 270 V, 170 V to 270 V
Input Frequency 50 Hz.
Output Voltage 200/230
Output Waveform Sinusoidal
Load Power Factor 0.8 Lagging
Features

No moving parts
Output Voltage correction within 1/2 cycle.
Short Term overload capacity.
Very high line transient / spike rejections.
Excellent Isolation characteristics.
 
SERVO VOLTAGE STABILIZER
Technical specifications
Capacity 1KVA to 3 x 350 KV
Input 90 V to 270 V, 130 V to 270 V
Frequency 47 to 53 Hz.
Protections Input under / over voltage
Short Circuit through MCB/MCCB
Available upto 3 x 350 KV
Features

High Efficiency
Zero Waveform distortion and phase shift
No effect on systems power factor and frequency variation
Fast Correction Rate.
 

Digital Inverter

Digital Inverters (PWM Mosfet Based Technology)(200VA to 5KVA)
Sine Wave Inverters (500VA to 30 KVA)

More

Sinewave Inverter

Digital Inverters (PWM Mosfet Based Technology)(200VA to 5KVA)
Sine Wave Inverters (500VA to 30 KVA)

More

True Online UPS

Capacity : 500 VA to 100 KVA
Input Voltage: 160-270 V AC Tow Wire
30-470 V AC Four wire

More

Home UPS

Capacity : 200 VA to 3 KVA
Input Voltage : 180 to 260 V
Input Frequency : 50 Hz + 3 Hz.
Output Voltage (Inverter Mode) : 230 V + 8%.

More

Line Interactive UPS

Capacity : 500 VA to 3 KVA
Input AVR Range : 150 to 280 V
Input Frequency : 45 Hz to 50 Hz.
Output Voltage : 200-250 V

More

Servo Voltage Stabilizer

Capacity : 1 KVA to 3 x 350 KV
Input : 90 V to 270 V
Input Frequency : 47 to 53 Hz.
Available upto : 3 x 350 KV

More

Stabilizer

Capacity : 150 VA to 25 KVA
Input : 130 to 270 V
Input Frequency : 50 Hz.
Output Voltage : 200/230
Load Power Factor : 0.8 Lagging

More

 
Copyright digitek.co.in